English
Leave Your Message

Hemostatic Y Valve kits Screw, Push pull, Spring, and T type

The Hemostatic Valve Kit is a medical device designed to connect catheters during clinical procedures and assist in percutaneous transluminal coronary angioplasty (PTCA). The kit helps manage vascular access when performing procedures such as angiography or angioplasty by providing a seal to prevent blood loss and maintain the integrity of the access site. It allows the introduction and replacement of guidewires, catheters, and other interventional devices while minimizing the risk of bleeding and air entry into the vasculature. The valve system helps maintain sterile conditions and facilitates efficient manipulation of the device during surgery.

    Product features

    Screw type: pressure-resistant and seal-fit operation. More convenient, tight safety, flexible valves

    Snap type: Can be operated by one hand, with pressure tight sealing valve for rapid hemostasis, simple, flexible and safe operation, side wall with extension tube, more convenient operation.

    Spring type: Can be operated by one hand, and the three-step valve is also non-bleeding during the two-step operation, with little obstruction; the automatic closing mechanism makes it automatically jump from the semi-closed state to the closed state while injecting contrast agent into the collateral tube.

    The function of the Y-type valve is relatively simple, and its main function is to guide, place and lock the guide wire. During the operation, connect the Y-type connector to the guide tube, insert the guide wire guide tube, pass the guide wire through the guide wire guide tube and the guide wire torque device, push the guide wire torque device, and slowly push the guide wire into the guide wire. in the guide tube. The operation mode is divided into two types: knob type and push type; the knob type connector can lock the guide wire by tightening the knob when in use, and the push type connector presses down the shell and then penetrates the guide wire, and the guide wire enters the rear pressure cap. The guide wire can be locked by popping up. These are two types designed according to the usage habits of clinical doctors, and their use effects are the same. 

    Hemostatic Y Valve kits Screw, Push pull, Spring, and T type (1)aio
    Hemostatic Y Valve kits Screw, Push pull, Spring, and T type (2)oiq
    Hemostatic Y Valve kits Screw, Push pull, Spring, and T type (3)1ym